Máy tiện CNC ML-560S

Mã sản phẩm: ML-560S

Máy tiện CNC ML-560S, May tien CNC ML-560S, ML-560S CNC Lathe, CNC turning machine, cnc turning

Tình trạng: Còn hàng - Bảo hành:

Specifications

Unit: mm

ITEM		ML-560S
Capacity	Swing over bed	Ø560
	Swing over saddle	Ø420
	Max machining dia	Ø320
	Max work length	320
	Distance between center	500
	Slant angle of bed	30°
Travels	X-axis	190(160 + 30)
	Z-axis	360
Main spindle	Spindle speeds (rpm)	STD:6000;OPT:4900
	Spindle nose	STD:A2-5, OPT:A2 -6
	Chuck size (inch)	STD:6", OPT:8"
	Spindle bore dia	Ø62
	Draw bar bore	STD:45, OPT:52
	Front bearing dia	Ø100
Turret	Type	LS-160A
	Disc shape / No. of tools	STD:8, OPT:10
	Square tool shank height	STD:20 × 20, OPT:25 × 25
	Boring bar shank dia	Ø40
	Indexing time (T-T)	0.5
Feedrates	Rapid traverse	X:30 , Z:30
Tailstork	Quill dia	Ø65
	Tapered bore type (live center)	MT4
	Quill travel	50
	Tail stock travel	290
Motors	Main spindle (30min/cont)KW(hp)	β8 7.5/11
	X/Z axis servo motor (kW)	X:β8 /3000 1.2 (1.6); Z:β8/3000 1.2 (1.6)
	Coolant pump	0.96
Power	Requirements
Machine size	Height	1795
	Floor space	3200 × 1750
	Weight (w/CNC)	3380

*Specifications are subject to change without further notice
*The robot arm shown in above photo is not included for standard ML-560S

Standard Accessories

• FANUC 0i-Mate TD Controller	• Coolant System
• Spindle Speed：6000 rpm	• Leveling Bolts and Pads
• Spindle Motor：7.5 / 11 Kw	• Automatic Lubrication System
• 6" Hydraulic Chuck	• Work Lamp
• Hydraulic 8-Tool Turret	• End of Program Light
• 4 Wedge Type Tool Clamps (for OD Tools)	• Tool Kit
• 4 Boring Bar Holders	• One soft and one hard jaw
• Taper Sleeve (MT No. 1 & MT No.2 ) x O.D. 20	• Operation & Maintenance Manual
• Boring Bar Bushings (Ø8,10,12,16,20,25) x O.D. 20	• Programming Manual
• Semi-automatic Tailstock with MT No.4 Quill	• Parts List

Options Accessories

• FANUC 0i-TD	• Manual or Automatic Tool Setter
• Siemens Controller	• Turning Tool Holder (□ 25 x 25)
• Mitsubishi Controller	• Collet Chuck
•8" Hydraulic Chuck (KITAGAWA)	• Bar Feeder
• Hydraulic 10 Tool Turret	• Bar feeder Interface
• Chain Type Chip Conveyor + Chip Bucket	• Oil Mist Collector
• Parts Catcher	• Transformer
• Foot Pedal for Tailstock	• Robot arm
	• Spindle motor: 11/15 kW